Natural Gas Detector – How To Choose

| Author: | Posted in Home & Family

Do you use natural gas in your home for your appliances or for heating your water? Then you probably already understand that you need a natural gas detector. Whereas natural gas is a safe and eco-friendly fuel, leaks can and do happen…and that may cause explosions, illness, and in extreme cases even death. Here are some factors you ought to think about before you decide on a natural gas detector.

Natural gas is most usually composed mainly of methane gas. Methane is highly flammable. If you are like most people, you associate methane with that distinctive rotten egg smell. But did you know that smell is really added in? Methane has no odor in the slightest degree, so the smell is put in as a method to signal you of a leak. In fact, if you’ve got a chilly or are asleep, that nasty smell may not be enough to provide you with a warning to a problem.

A natural gas detector is the most effective method to make sure that you’re protected against leaks, however it is important to decide on the proper one. Notice out how sensitive the detector is to different chemicals, or if it can be triggered by humidity. If thus, you’ll want to require that into consideration when you put in it.

Next, you want to understand what the Lower Explosive Limit, or LEL, of the detector is. This refers to the concentration of natural gas required to trigger the alarm. If a hundred% means that an explosion, an LEL of 20% means that that the gas only has got to accumulate to twenty% of its LEL so as to line the alarm off. This provides you lots of time to take action before things get dangerous.

You wish to make sure that you’ll be able to hear the alarm from anywhere in your house. Several natural gas detectors use a loud noise, thus if you have a hearing impairment you’ll wish to decide on one that incorporates flashing lights as well.

If you have multiple sources of natural gas that are not shut together, you may want to urge a natural gas detector that comes with a lot of than one sensor. You’ll be able to place the sensors close to the gas source, and mount the alarm during a central location.

You may want to perform some basic maintenance on your natural gas detector. If it has batteries, or relies on a battery back-up in case of power outages, realize out how often you ought to check them, and whether there’s a test button on the detector to do so. Also ask if the detector has an alert system to let you recognize if the batteries want replacing.

Conjointly notice out how long the sensors are expected to last, and if there’s any warning in place that can let you know they are wearing out. If you can, notice an unit with replaceable sensors, or else you may have to get a replacement natural gas detector when the old sensors no longer work properly. If the detector wants to be calibrated, raise where and how often this needs doing, and the way much it can cost.

If you are looking for a natural gas detector then visit for more information.

Related Links


This author has published 15 articles so far. More info about the author is coming soon.

Leave a Reply

Before you post, please prove you are sentient.

What is 7 multiplied by 9?