Marble Tile Maintenance Procedures

| Author: | Posted in Home Improvement

Marble, which may be white or colored, is really a stone that is frequently utilized as a building material for floors, kitchens, and bathrooms. A problem with marble is that it’s porous, and thus it can absorb stains, or turn out to be etched due to acids. Should this occur, wipe off any spills immediately, as you would on a wood surface. Steer clear of setting beverage glasses directly on marble as they leave rings. In the event of severe harm, you might need to check with some marble restoration companies.

To preclude stains and soil from being absorbed into its porous surface, it could be best to seal marble using a paste or sealer. To aid in the prevention of etching, don’t permit acids to directly contact your marble. Alkaline solutions will be absorbed by the marble and break down the surface leaving it rough. If you seal your marble tiles well, you need to have the ability to clean them using a damp mop. In instances where soil does not come off readily, use a solution consisting of a mild detergent to wash the marble, then rinse off al residue. Remove stains promptly.

To remove stains from marble, get an absorbent material like a napkin, paper towel or facial tissue. Moisten your absorbent cloth using a chemical stain removal solution, then rub it on the stain, next, make a paste out of whiting powder and apply it to the stain and cover it. Depending of the age and depth of the stain, it should be covered for up to forty eight hours. To prevent the cleaning and whiting compound from drying out, it may be covered with plastic wrap and taped down. Mix the amount that you simply are going to use in short order, in the event you need much more later, mix another batch.

Acidic drinks, like fruit juice and soda will etch and remove the shiny polished surface of marble, so try not to permit them to contact it. Immediately clean off the acidic spill and wipe the surface with a clean, most cloth. In instances where the marble surface has become etched, it may need to be polished. For big marble restoration jobs, you might wish to employ an expert with expertise in how to clean marble floors

Your marble may also be stained by oils, such as butter, lotions, and hand cream, among others. As quickly as possible, spread the surface with an absorbent fine powder like whiting or even corn starch. After a brief time frame, wipe the powder off the surface and apply some more. Then, leave the marble alone for one day. Then scrub the surface of the marble utilizing a warm detergent solution or wipe it off with a towel that’s dampened with ammonia, the wipe of the surface with a clean dry cloth. If the oil stain is not completely removed, you can use an alkaline solvent. Use acetone to dampen a cloth. Make sure the area is well ventilated. Do not use near a spark or flame, and do not leave the solution on for too long.

For stains that have resulted from coffee, tea, or soft drinks, do the following. Get a wiping material soaked with 20% peroxide, at hair bleaching strength, and add a couple of drops of ammonia.

Stains caused by rust are often the result of metal items which are in prolonged contac with the marble surface. Make use of a commercially obtainable rust stain remover. Read the directions and adhere to them explicitly, do not let the product stay on the surface of the marble for tool long, or damage may result.

For general maintenance, it’s advised to dust mop interior floors often using a clean non-treated dry dust mop. Abrasive sand and dirt will harm the surface of your marble. To minimize this harm, cover heavy traffic areas with rugs or mats. Make sure the under surface of the rug or mat has a non-slip rubber or foam rubber material.

Come visit one of the finest marble restoration companies

Related Links


This author has published 9 articles so far. More info about the author is coming soon.

Leave a Reply

Before you post, please prove you are sentient.

what is 5 in addition to 4?